EAA Builders Log Website
EMail address:
Password:
- Lost my password
close
EAA Builders Log
(An EAA website).
Help
Contact Us
About
Sign Up
Login
Project:
DaveBellairs
-
Listing of Entries
(Please mouse-over any icon to get a description of that function).
Categories
Show All Entries
- (652)
Research
Workshop
- (4)
Empennage
- (14)
Fuselage
- (54)
Firewall
- (78)
Tail Feathers
- (40)
-
Tips primed
-
Sanding
-
Sanding
-
Primed
-
Priming and sanding
-
Elevator trim wires
-
Sanding
-
Empennage fairing...
-
Empennage fairing...
-
Empennage fit
-
Empennage fairing...
-
Last epoxy and...
-
Finished sanding
-
More sanding
-
More tip sanding
-
More epoxy and foam
-
Sanding the primer
-
Sanding and priming
-
More sanding
-
Still more epoxy and...
-
More epoxy filling ends
-
Epoxy filling
-
More foam filler
-
HS tips and foam filler
-
HS end rib fill in
-
Sanding again...
-
More sanding and epoxy
-
More epoxy and tip...
-
More epoxy and filler
-
Tip sanding
-
Sanding tips
-
Sanding and epoxy...
-
Empennage tip sanding
-
MoreElevator and HS...
-
HS and elevator tips
-
More tip work
-
More tips
-
Elevator tip
-
Empennage tips
-
Rudder upppr tip
Wings
- (105)
Controls
- (6)
Avionics
- (149)
Lighting
- (13)
Instrument Panel
- (9)
Landing Gear
- (4)
Engine
- (159)
Propeller
- (1)
Fuel System
- (7)
Interior Finish
- (3)
Paint / Decals
- (6)
Inspection
Tools
Builder Name:
Dave Bellairs
-
Project:
Vans - RV-7
-
VIEW REPORTS
Total Hours:
1460.9
Total Flight Time:
Start/Last Date:
Jun 24, 2017 - No Finish Date
Engine:
Lycoming IO-360
Propeller:
Whirlwind 200RV
Panel:
Advanced Flight Systems Avionics
Friendly URL:
https://eaabuilderslog.org?s=DaveBellairs
Home or Last Project Picture
Dec 14, 2022
HS and elevator tips
- (4 hours)
Category: Tail Feathers
Sam attached aluminum backer strips to right HS and elevator tips. Trimmed the left HS tip of excess fiberglass and epoxy. Also removed the foam insert in the left HS tip and added additional layers of fiberglass and epoxy to support the outer layer of glass. Laid up and epoxied a layer of glass on the left elevator transition betweeen the tip and aluminum edge. Used a strip of plastic to apply the epoxy soaked glass to the tip/elevator transition and to the left elevator tip.
A7361AE1-367D-4BFE-8794-FAAF6D874BCA.jpeg
B7CDA48B-ACE5-4861-9A27-DE748BEFEA7D.jpeg
B492A849-B0B2-454E-8904-93606D615B9F.jpeg
28002336-DD98-45A5-B350-E8151AE7CAB7.jpeg
9709498C-747F-4019-9298-C9BE7FB876DC.jpeg
4D7D7B2C-C1AC-4813-B67D-3F87D793ABC9.jpeg
NOTE: This information is strictly used for the EAA Builders Log project within the
EAA organization
.
-
Policy
-
© Copyright 2024 Brevard Web Pro, Inc.